1.6mm Pure Zn/Tafa01t/Aluminum Used in Pipe Line

Product Details
Customization: Available
Product Type: Wire
Material: Zn Al
Gold Member Since 2015

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Type of Ownership
Private Owner
Find Similar Products

Basic Info.

Model NO.
1.6mm Pure Zn
Carbon Content
0
PCD
40-45
Transport Package
Packing with Spool
Specification
1.6mm
Trademark
wisdom
Origin
China
Production Capacity
10 Tons Per Month

Product Description

Introduction
Pure Zinc & Zn/5Al are excellent material choices for corrosion protection in both atmospheric and marine environments. Using either the electric arc spray or combustion wire process, wire coatings of these materials
act as sacrificial anodes, galvanically protecting iron or steel substrates.Decades of field work using these coatings has clearly demonstrated that they are far more effective and longerlasting than hot dip galvanizing.
Coatings of ZnAl often have better corrosion resistance than either pure zinc or aluminum, by combining the advantages of both materials. This is particularly true in areas where crevices exist and residual moisture and contamination is present, and in areas where the coating has been scratched or scraped, resulting in coating voids and exposed substrate.
Using the electric arc spray process, coatings of these materials are often used in the electronics industry for EMI and RF shielding, or as conductive coatings on capacitors.

Typical Uses and Applications
Atmospheric and immersion corrosion protection on large steel or iron structures such as bridges, roadway
barriers, posts and poles, offshore structures and marine structures.
Atmospheric corrosion protection on steel or iron components such as tanks and gas bottles
EMI and RF shielding on plastic components (electric arc spray only)
Electrical conductance on components such as the Conductive areas on insulators and capacitor end caps

Product Details
Chemical composition:
Type Chemical composition
Zn Al Others
Zn 99.9+ Balance   0.1
Zn 15Al Balance 15  

Specifications
Grade AWS
Zn C2.25/C2.25M W-Zn-1

Physical Properties
Grade Density Rockwell Hardness
Zn 7.14 g/cm3  
ZnAl 7.18 g/cm3  

Typical Deposit Characteristics: 
Grade Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab
Zn HRB 20 - 30 6.9 - 15.0 Mpa 24 lbs /hr/100A 0.7 Good
Zn 5Al HRB 40 -45 20.7 - 24.1 Mpa / / Good
 
Standard Sizes & Packing:
Diameter  Packing   Wire Weight
1/16 (1.6mm) D 300 Spool     15kg((33 lb)/spool 
Other sizes can produced based on customers' requirement.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier