Product Description
Wisdom SS316 Arc Spray Wire
DESCRIPTION
SS 316 stainless steel wire specifically designed for arc spraying. It produces dense,
well-bonded coatings with excellent machine ability and wear and corrosion resistance. SS316 is
widely used for machine element repair, dimensional restoration and wear resistance applications. It has relatively high shrink characteristics and should not be used for coatings over 0.075 inches thick.
TYPICAL DEPOSIT CHARACTERISTICS:
? Typical Hardness HRB 90-100
? Bond Strength 6750 psi
? Deposit Rate 10 lbs /hr/100A
? Deposit Efficiency 75%
? Wire Coverage 0.8 oz/ft2 / m
? Surface Texture *Variable
? Machine ability Good
* Depends on air pressure used.
SURFACE PREPARATION:
Surface should be clean, white metal,
with no oxides (rust), dirt, grease, or oil
on the surface to be coated. Note: It is
best not to handle surfaces after
cleaning.
Recommended method of preparation
is, to grit blast with 24 mesh aluminum
oxide, rough grind, or rough machine in
a lathe.
APPLICATION:
? Part Restoration
? Rams
? Food Industry Rolls
SPECIFICATION:
316 SS
NOMINAL CHEMICAL COMPOSISTION (wt%):
Cr Ni Mn Si Fe
17.0 12.0 2.0 1.0 Bal
RECOMMENDED SPRAY PARAMETERS:
Diameter Air Pressure Voltage Amperage Standoff
1/16" (1.6mm) *50 - 60 psi *28 - 30 *100 - 200 *4 - 6 in (10 - 15cm)
* Parameters are typical and may vary depending on equipment used. Contact your equipment manufacture for optimum spray parameters.
STANDARD SIZES & PACKAGING:
Diameter Packaging Wire Weight
1/16 (1.6mm) D300 Spool 15kg (33lb)/spool
Wisdom Heating Alloy (Shanghai) Co.,Ltd
ADD: Room 502A Zhennan Road, No.1428,Shanghai City,China
TEL:+86-21-61395047 FAX: +86-21-61395049
Http: wisdom-sh2015.en.made-in-china.com wisdom-sh2015.en.made-in-china.com
Audited Supplier 
){kind=link}