1.6mm Inconel625 Alloy Wire Used in Sea Water Service

Product Details
Customization: Available
Product Type: Wire
Material: Inconel 625
Gold Member Since 2015

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Type of Ownership
Private Owner
Find Similar Products

Basic Info.

Model NO.
Inconel625
PCD
Inconel 625
ET
Inconel 625
Hole
Inconel 625
Brand
Wisdom
Surface
Bright
Place of Origin
Wisdom
Name
Inconel 625
Feature
Thermal Spray Wire
Shape
Wire
Size
1.6mm
Other Size
Customed
Certificate
ISO9001
Usage
Coating

Product Description

1.6mm Inconel625 Alloy wire Used in Sea Water Service
Introduction
Nickel Alloy 625 is used both for its high strength and outstanding aqueous corrosion resistance. The strength of Nickel Alloy 625 is primarily a solid solution effect from molybdenum and columbium. Nickel Alloy 625 has excellent weldability. The matching filler metals are often used for dissimilar metal joining and to weld the aqueous corrosion alloy.
It can Equivalent to: Tafa 71T, Sulzer Metco 8625
Surface Preparation 
Surface should be clean, white metal, with no oxides (rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning. Recommended method of preparation is, to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
 Application
l Digesters 
l Corrosion Resistance
l Oxidation and Heat resistant Coatings
l Protective coatings against corrosive gases, protection against scaling of conventional low-alloy steels, build up coatings for dimensional restoration. 
Chemical composition:
Grade Ni% Cr% Mo% Nb+Ta% Fe%
Alloy 625 Min 58 20-23 8~10 3.15-4.15 Max 5
 Physical Properties
Grade Density Melting Point
Alloy 625 8.4g/cm3 1290°C-1350 °C
 
 
Typical Deposit Characteristics:
Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab
HRB 92 7000 psi 11 lbs /hr/100A 70% Good
 Standard Sizes & Packing:
Diameter Packing   Wire Weight
1/16 (1.6mm) D 300 Spool 15kg((33 lb)/spool
Other sizes can be produced by customers' requirement.
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier